AGN Moderator approved my post beforehand, allowing the posting of this post with the photos of two moderators. The buyer gets the choice of ONE of two moderators.
Hubens GK1 in .25 Caliber. This was sourced from Ares Tactical. I am the second owner. The first owner purchased new, had a major accident that paralyzed him for a season, and required more than half a dozen surgeries. He claimed to have gotten less than 100 shots through this before the accident, and I believed him based on our extended conversations. He sold everything, including his compressor.
I would much prefer a face-to-face meet-up in SoCal, if possible, so the buyer can put this through its paces.
Holds pressure beautifully. I've filled it up to 305 Bar (4500psi) because I don't have a compressor that goes beyond this. At either 305 Bar or 150 Bar, it holds pressure perfectly up to 1 month at a time without any drop. That's the longest I've gone without shooting this. My shooting sessions are short. I've put a bit less than 400 pellets through this, primarily using the GTOS and a few rounds of JSB Exacts. I've never had a jam, but 400 rounds is not a lot. The JSB GTOs and Exacts seats beautifully. I have never tried slugs.
This does have the less common and more desired feather tube carbon fiber which matches the Hubens Moderator perfectly, if this matters to you.
The only functional defect I found is that the rear sight sight blade/leaf can be moved around the screw axis. (Just the leaf, not the rest of the sight which is rock solid stable.) It works perfectly, but one needs to be aware not to bump it when shooting. This does not matter in the least if you are going to mount a red dot or scope.
$990.
Hubens GK1 in .25 Caliber. This was sourced from Ares Tactical. I am the second owner. The first owner purchased new, had a major accident that paralyzed him for a season, and required more than half a dozen surgeries. He claimed to have gotten less than 100 shots through this before the accident, and I believed him based on our extended conversations. He sold everything, including his compressor.
I would much prefer a face-to-face meet-up in SoCal, if possible, so the buyer can put this through its paces.
Holds pressure beautifully. I've filled it up to 305 Bar (4500psi) because I don't have a compressor that goes beyond this. At either 305 Bar or 150 Bar, it holds pressure perfectly up to 1 month at a time without any drop. That's the longest I've gone without shooting this. My shooting sessions are short. I've put a bit less than 400 pellets through this, primarily using the GTOS and a few rounds of JSB Exacts. I've never had a jam, but 400 rounds is not a lot. The JSB GTOs and Exacts seats beautifully. I have never tried slugs.
This does have the less common and more desired feather tube carbon fiber which matches the Hubens Moderator perfectly, if this matters to you.
The only functional defect I found is that the rear sight sight blade/leaf can be moved around the screw axis. (Just the leaf, not the rest of the sight which is rock solid stable.) It works perfectly, but one needs to be aware not to bump it when shooting. This does not matter in the least if you are going to mount a red dot or scope.
$990.
Last edited:
