taking a tip from @MikeVV, I swapped out my Ghost huma reg gauge for a larger Wika reg gauge. Besides being a little easier to read, it seems to report a lower reg pressure for targeted fps than the OEM Huma gauge.
example - with the wika showing 65 bar on reg, I am averaging 911fps on 15.9 Hades. Before, the Huma would be at 75bar for similar fps.
. For JSB MRD 25.9, it is 120 @931fps for wika but OEM Huma was at 130 for 925fps
I reused the OEM Douty seal and no leaks thus far. All in all, happy with the wika gauge but not decided if I will change out the tank gauge yet.
example - with the wika showing 65 bar on reg, I am averaging 911fps on 15.9 Hades. Before, the Huma would be at 75bar for similar fps.
. For JSB MRD 25.9, it is 120 @931fps for wika but OEM Huma was at 130 for 925fpsI reused the OEM Douty seal and no leaks thus far. All in all, happy with the wika gauge but not decided if I will change out the tank gauge yet.
