Getting replacement caps and baffle for hugget

[Makoda]

I bought a hugget for a .22. Although it will shoot a .22 through it, the baffle dividing pieces and the end cap are very tight fitting. I actually likes this for my .177 guns, so I didn't really want to drill them out. Is it possible to buy the 2 dividers and a end cap that is a bit larger, so I could use it for my .177's and .22's.

 

[Coldair]

I would contact the dealers who sell the Huggetts such as AoA or Utah Airguns to inquire about the parts you want and if they can't then I would be confident to suggest ordering from the UK since they are only parts but would check local first.


CA