Gauntlet regulator adjusted

[JH4410]

 Just wanted to share my results on my .22 Gauntlet after I added shims to the regulator. First off I would like to thank Hajimoto for all his hard work. His step by step video made this reg adjustment so easy to do. I shot my gun for about a week before I shot it though my chronograph and here are a couple of my results.
​15gr Beeman field target specials- average speed 806fps
​18.13 JSB exact jumbo heavy - average speed 749fps
​My reg was factory set at 1100psi with .015 shim thickness. I added another .015 for a total of .030 shim thickness and now my reg is reading 1300psi. Now here are my results.
​15gr Beeman field target specials-average speed 883fps that's 25.9fpe and a gain of 77fps
​18.13 JSB exact jumbo heavy -average speed 824fps that's 27.3fpe and again of 75fps
​Very happy with the results and very happy with my Gauntlet. I'm curious to see if my shot count dropped, that's my next test. Hope this info helps. Jon

 

[Hajimoto]

What a nice thing to be welcome with when one comes to the forums! You are very welcome, I am glad that the Gauntlet regulator adjustment video was a help. 
You have that Gauntlet performing like a champ! Have your groups changed at all with the additional FPS? Can you post a photo or two of your groups?

Thanks for sharing your results!

 

[JH4410]

Hajimoto I did some shooting yesterday and gun is still shooting one hole groups@25yards. I think it's shooting better. It's like I found the sweet spot.