Umarex Gauntlet 2 o-rings

[mgd]

Hello,
Any one know if Gauntlet 2 (.25 cal) uses the same o-rings as the 1st generation Gauntlet?

I found a source for a gen 1 gauntlet oring kit but seller cannot confirm if it is compatible with the G2 .

 

[Rizz01]

Yes, they do. I ordered my o-rings from Captain O-Ring and the package was marked for g1 & g2. I own a g2.
Hope this helps.

 

[mgd]

Thanks. I got a set from ebay from captain o ring and they say that they couldnt confirm if the kit would work with the G2

 

[Rizz01]

Hajimoto used to have a kit and I'm positive it was for both.
You see, the gauntlet 2 is supposed to be the same gun aside from the regulator, the bolt and the stock.
Good luck!

 

[Hajimoto]

All of the action internal o'rings found in a Gauntlet 1 of .22 or .25 caliber are the same in the Gauntlet 2 .22 and .25.

 

[Rizz01]

The Gauntlet "Master" has spoken!
Thanks!

 

[mgd]

thanks Rizz01 and Hajimoto

 

[Rodney Maynot]

All of the action internal o'rings found in a Gauntlet 1 of .22 or .25 caliber are the same in the Gauntlet 2 .22 and .25.

I've got a question. Are the o - rings that are found inside of the regulator of the gen 2 in 22 , 25 and 30 cal the same size o - rings? Thanks in advance Mr. Hajimoto.

 

[Hajimoto]

I've got a question. Are the o - rings that are found inside of the regulator of the gen 2 in 22 , 25 and 30 cal the same size o - rings? Thanks in advance Mr. Hajimoto.

Because Umarex used two different regulator manufacturers for the Gauntlet, they are not interchangeable. But if you have a Gauntlet 1 .22 and a Gauntlet 2 .25 and the regulator is from the same manufacturer, yes they would use the same o-rings.

 

[OldVet]

Because Umarex used two different regulator manufacturers for the Gauntlet, they are not interchangeable. But if you have a Gauntlet 1 .22 and a Gauntlet 2 .25 and the regulator is from the same manufacturer, yes they would use the same o-rings.

I like very much how the spring washer stack in the regulator is held in place by the O ring at the top of the stack. The shims are easily switched to adjust the regs power output. I was able to find a shim at a local hardware store that has enabled me to shoot a 28 grain slug at 893 fps in my .22 cal. SL Thanks for all your informational videos on everything , and I can't wait to use the Buck rail Haji receiver (as I call it) for the Tactical look that I already have purchased from you. The main reason I purchased my 22 SL was for that 281/4" barrel. I was was disappointed to find a 231/2" barrel was the true length. I was looking at some TJ's airgun barrels , and was wondering if you ever re barreled any of your Gauntlets. I would love to see what it could do with a 32" barrel. OV.