Dear All,
First, I hope that ALL here are in good health and spirits! I just wanted to let you know that FX came through (Johan) as always in their aid of parts or advise. In short, the problem of my relatively new FX Wildcat in .25 caliber was that mags were not indexing properly (loaded with pellets) and hard to insert and remove.
After some parts replacement the indexing problem was somewhat lessened but the removal was difficult at best.
A fellow shooter advised to move the barrel assembly a bit forward and directed me to Airguns of Arizona's YouTube video of the Wildcat's o-ring removal procedure. There is such a process that was shown when the barrel was reinstalled.
Now I have two great FX guns in my arsenal and a Leshiy. My new year is looking good. I hope yours will be too!
Thanks for letting me post and learn!
First, I hope that ALL here are in good health and spirits! I just wanted to let you know that FX came through (Johan) as always in their aid of parts or advise. In short, the problem of my relatively new FX Wildcat in .25 caliber was that mags were not indexing properly (loaded with pellets) and hard to insert and remove.
After some parts replacement the indexing problem was somewhat lessened but the removal was difficult at best.
A fellow shooter advised to move the barrel assembly a bit forward and directed me to Airguns of Arizona's YouTube video of the Wildcat's o-ring removal procedure. There is such a process that was shown when the barrel was reinstalled.
Now I have two great FX guns in my arsenal and a Leshiy. My new year is looking good. I hope yours will be too!
Thanks for letting me post and learn!