FX Wildcat fill gauge question

[Mark_Walt]

I haven't been too active on the forum lately so I apologize if someone has already answered this. I bought my .25 Wildcat last year in December and the fill gauge pressure has always showed 12 bar lower than the pressure in the gun. Is there anything that AOA will do to fix this problem or is it too little of a problem to bother with? The 1 year manufacturer warranty will expire next month so that's why I'm trying to figure this out now.

 

[Tominco]

You can call them to see if they'd replace it with a new gauge but, those small gauges are known to be a little off. I wouldn't bother going through the trouble if you're the only one filling it. Even if you lend it out, just stick a note on it.
Tom

 

[Jayman07770]

Mine does the same thing. Tominco is right about those small gauges. I just use my tank gauge when filling and fill when the gun's gauge is around 160bar. Never have an issue with accuracy with plenty of shots.

 

[Dave09]

Can some one put a picture or a link to the Part I need to buy to adat to the fill probe for the wild cat I bought a 1/8 inch bsp fitting from pyramid air but it don't look like it's the right one

 

[Alan]

I view miniature gauges like idiot lights on a dashboard. By the time they tell you anything of value, you've already figured out something is amiss. Do like Jay says, and you'll never have an issue. 

 

[CampFussell]

"Dave09"Can some one put a picture or a link to the Part I need to buy to adat to the fill probe for the wild cat I bought a 1/8 inch bsp fitting from pyramid air but it don't look like it's the right one

I think this is what you need? The threaded part of the wildcat probe should screw into the female end of this.

http://www.pyramydair.com/s/a/Air_Venturi_Male_Quick_Disconnect_1_8_BSPP_Female_Threads_Steel_Rated_to_5000_PSI_Incl_Delrin_Seal/3550

and end up looking like this

 

[Dave09]

Thank you very much I ordered this exact part whats the odds of that lol! It just did not look like it was the correct part but I guess it is Thanks again and Happy Thanks Giving to All.back after Holidays extended vacation so needed!!!

 

[CampFussell]

Dave
I lucked out with the answer. I don't even have a Wildcat, but hope to shoot Mark_Walt's again next month!
Hope you have a great Holiday as well!
Jimmy

 

[hsnmz]

Does anyone know the size of fill probe o-rings.