FX Wildcat .25 and Predator Polymags??

[Fenian]

Hey

so Predator Polymags are not fitting in the magazine when you try load the filled magazine into the gun

before I give up or try something I shouldn’t, do any of you guys use them or nick the ends off them with a razor blade or just not use them for this reason?

 

[lenweber2]

Do they make shorts like in .22?

 

[Yote]

You have to buy the polymag shorts

 

[Bob_O]

I don't think they make the PM shorts in 25 caliber.

 

[Glem.Chally]

Just sand the tip down a bit if you really want to shoot them.

 

[Fenian]

Will clipping or sanding the ends enough to make them fit lose any accuracy does anyone think? Only making 40 yard shots.

i heard some people load them single into the barrel and push the level forward. Any issues that could arise from this?

sorry, just new to air rifles and shooting in general 

 

[Mike_Lenardon]

I single load mine. Irked me also when I found out they don"t fit.

 

[Bob_O]

Will clipping or sanding the ends enough to make them fit lose any accuracy does anyone think? Only making 40 yard shots.

i heard some people load them single into the barrel and push the level forward. Any issues that could arise from this?

sorry, just new to air rifles and shooting in general

I don't think you'll see accuracy issues at that range. The only issue with the pointed tipped pellets could be poking of the breech o-ring..........though I haven't heard of that problem with the polymags, I do remember mention of it with the metalmag pellets but I don't remember what gun it was.

 

[Fenian]

Has anyone tried direct loading them into the barrel? Is it as simple as placing into the barrel and pushing forward into the chamber?

 

[Yote]

You have to buy the polymag shorts

25cal. My bad

 

[crittahitta]

A lot of guys just pull the red tip out with pliers and say it works great.

 

[Killemdead]

All i did was Took a pair of toenail clippers and remove the Polymer tip...its pretty Accurate out to 30 & 40 yards....hit a crow and the Impact was waaaay louder then the gun itself....

 

[Fenian]

Great

ill try just taking the very tips off them, and single loading and report back how it goes