fX wc

[Yote]

would anyone have a chart or info for all the orings in the 22fxwc.thanks in advance

 

[hawkeye69]

http://www.fxairguns.com/wp-content/uploads/2015/10/wild-exploded-drawing-AoA.pdf

 

[Yote]

Thanks Hawkeye but this is useless to me.it gives the part number and location but in the dieagram it doesn’t mark it with the part number 

 

[Droptine26]

Page 3 and 4 has the part numbers

 

[Yote]

Yes I know this but I want to order from a oring store.So explain where 8 A is 

 

[AirgunBill]

"Yote"Yes I know this but I want to order from a oring store.So explain where 8 A is

looking at the diagram. 8A is really from diagram A part 8 which is a 1.78 mm cross section 0-ring by 7.66 inside diameter. The O-Ring store lists a 1.78mm x7.65mm o-ring which should do the job. Bill

http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_43&products_id=41974

 

[Yote]

"AirgunBill"

"Yote"Yes I know this but I want to order from a oring store.So explain where 8 A is

looking at the diagram. 8A is really from diagram A part 8 which is a 1.78 mm cross section 0-ring by 7.66 inside diameter. The O-Ring store lists a 1.78mm x7.65mm o-ring which should do the job. Bill
http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_43&products_id=41974

I under stand that .I can’t figure what it goes on .

 

[Yote]

"AirgunBill"

"Yote"Yes I know this but I want to order from a oring store.So explain where 8 A is

looking at the diagram. 8A is really from diagram A part 8 which is a 1.78 mm cross section 0-ring by 7.66 inside diameter. The O-Ring store lists a 1.78mm x7.65mm o-ring which should do the job. Bill
http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_43&products_id=41974

I under stand that .I can’t figure what it goes on .

 

[Yote]

Ok for everyone that helped me out thank you.Im a little slow but finally figured out how too read the chart ?