FX WC Mk1 magazine advancement issue

[davecole]

Those who have or have had a Wildcat Mk1 and experienced magazine advancement issues we would like to hear from you. I’m not really needing ideas on how to fix it from those who haven’t had this problem, I’m needing to know how to fix it from those who have.
Every once in a while, the magazine advancement arm on the WC doesn’t quite advance the magazine. Those of you who have experienced this before, what was your resolve? 
the magnet is in place, the arm shows zero wear, the pin in the probe shows no wear either.

like I said, it only does it every once in a while. Just enough to be a tad frustrating.

 

[osage]

Bought my WC Mk1 in late 2015 and many if not most people had magazine problems. There was lots of info on YouTube and advise from Ernest and AOA as I remember, should be able to track down some help. AOA fixed mine on warranty and they had to do lots of them.

 

[Yo]

TIGHTEN AND-OR ROTATE OR REPLACE THE MAGAZINE CATCH INDEXING ALLEN SCREW. THAT HEAD GETS WORN OUT. Yo! 

 

[Yo]

ALSO ADJUSTING THE TENSION ON THAT RELOADING ROD HELPS TOO. Yo!

 

[Yo]

SORRY BEEN A WHILE... Yo!

 

[FX-USA]

Hi davecole, 

sorry to hear your having some magazine difficulties If you’d like call into our HQ location in North Carolina and a technician can help you walk through any troubleshooting or warranty fixes. You can also email with a name and number maybe a brief description and we can reach back to you as soon as possible. 


The contact info is:

phone number: 866 639-0772

Email : [email protected]



Regards, 

FX Customer Service Support

 

[cootertwo]

I think an adjustment of the cocking rod is all that is necessary.