Imagine my story. I don't know what to do laugh or cry.
March 4th got the FX Impact MK2 PP
March 8th ordered some Huma parts including the dual port.
March 8th I suppose to take a flight for family vacation trip South when the airport authorities removed us from the airplane do to some technical difficulties, they've call it some glitch.
So, sittin at home since in self isolation (I am 60, smoker, and cancer survivor), tinkering about this hobby full time.
March 18th I received the Huma parts, reading through this forum I made a decision to enlarge the brass transfer port, I have a micro milling machine, it is small but I learned to work with it. Unfortunately no lathe, I would be satisfied with any table top - basics in my garage.
March 22nd I did the change, milled out the transfer port, loctite the brass piece to the barrel, but cannot shoot because got to Sunday evening bed time, and I have no silencer.
Today let me shoot some numbers. The f*n pellet won't fit in the hole. Measure it and the Huma hole is about 6.42 mm. Sent them an email "by any coincidence didn't they forgot to make a very last cut operation on the lathe, because the original FX port is about 6.62"
I am still patient and cool. Just to tell this story to people hallways looking for any smallest sh*t to cry, wind or yell about.
Edit: btw, why would I measure a part right out of the bag if that just arrived in the mail...you would do?