Found an FX T12 awhile back. I'm looking at single shot loaders, but haven't seen any for the T12. I realize this is an older model, so I'm hoping one for a more current model will work. What version would use the same loader ? Thanks for any information.
FX FX T12 single shot tray
- Thread starter SAW
- Start date
Here ya go
www.airgundepot.com
FX Single Shot Tray | Airgun Depot
Check out this great deal on the FX Single Shot Tray. Need advice? Let our airgun specialists help you today!
Upvote 0
I found this searching eBay after reading your post
This is not a recommendation as I've never shopped this seller
Hope this helps
Edward
a
This is not a recommendation as I've never shopped this seller
Hope this helps
Edward
FX Bobcat / T12 air rifle single shot loader | eBay
FX Bobcat & T12 single-shot loader. Available in. 177 &. 22. Magazine casing made of carbon reinforced PLA material.
www.ebay.com
Upvote 0
No help on a shot tray but I have the FT version of the T12. Really solid rifles with awesome barrels, you don’t hear much of them.
Upvote 0
Thanks, I'll take a lookHere ya go
FX Single Shot Tray | Airgun Depot
Check out this great deal on the FX Single Shot Tray. Need advice? Let our airgun specialists help you today!
Upvote 0
That's the style I'm looking for.I found this searching eBay after reading your post
This is not a recommendation as I've never shopped this seller
Hope this helps
Edward
aFX Bobcat / T12 air rifle single shot loader | eBay
FX Bobcat & T12 single-shot loader. Available in. 177 &. 22. Magazine casing made of carbon reinforced PLA material.www.ebay.com
Upvote 0
Yes sir. I don’t think they made many. I believe it was an AOA only option.
Off topic question but does your ever fail to cock when cycling the bolt? Mine did when I first got it, which I am guessing is why it was being sold. The trigger had just enough side to side play that it would slip on the sear. I made two thin washers to shim the side play and have not had an issue since.
Upvote 0
Haven't had that happen to mine. Had to replace a couple of o rings. I'm going to check for side play in the trigger though. From what I see posted, a tray for a Bobcat should work, I think.
Upvote 0