FX Royale Fill Probe

[Keith2324]

I'm in the process of ordering some o-rings for the fill probe assembly for an FX Royale 400 (G section in the schematic) but I'm having a hard time finding the PUR90 type. Can anyone point me in the right direction?

Thanks,

Keith.

 

[PerkyVal]

My Royale had a fosters, not a probe.

 

[elh0102]

It is a foster system, but I see the O ring to which you refer. I ordered a set of O rings for my Royale from O Rings and More. I ordered this one in the same Buna 90 material as the others, didn't notice the PUR designation, but I expect it would work okay. You could call and ask, I expect they have it. You could also try The O Ring Store.

 

[Glem.Chally]

McMaster and carr have it, it's the same as the old c3 bumper on the impact. Should be able to find the size by googling "fx impact oring list updated" it'll bring up a thread here that has a link to it.

You might get lucky and just pull it out, clean it up and the little blue rod and the recess it fits into. And flip it over, they are tough buggers.

Oh maybe oring store does have it.

http://www.theoringstore.com/index.php?main_page=product_info&cPath=0&products_id=27547%E2%80%8B

 

[elh0102]

Sorry, double post, please delete.

 

[Keith2324]

Thanks Glem.Chally. I'll check it out.

And yes, it's a foster fitting. Wrong verbiage.