G
Or Else has Ernest a video out too
Anyone have a link to Ernest's video for installing the Power Plenum on the Impact series?
Upvote 0
Some dealers have them already and have sold them, fx usa also although i think theres a lineup.
Upvote 0
Earnest video makes it look like a walk in the park. Look too easy for anyone to install himself.Â
Upvote 0
My apologies to all, but especially Ernest. It appears his video has been shared on an individual as-needed basis only, and not posted publicly. I did not realize this when I asked for the link to it. After seeing FX publish the Master Class video series, I just expected the PP install would be covered as well. I don't understand the FX apprehension about a PP install video, but I'll certainly respect it. Again, my apologies, Ernest.
Upvote 0
How the hammer seat (part C1) should be installed?
1. In Krale's video he is tightening it and then rotating it backwards about 2 turns, so that the measurement from the end of the hammerseat the to the front of the casing is 6-6.5 mm.
2. Ernest is tightening the hammerseat all the way in.
Which one is the right way to do it?
1. In Krale's video he is tightening it and then rotating it backwards about 2 turns, so that the measurement from the end of the hammerseat the to the front of the casing is 6-6.5 mm.
2. Ernest is tightening the hammerseat all the way in.
Which one is the right way to do it?
Upvote 0