Hi everyone. Received my Panthera last week and today I experienced that the safety is not working properly. Is there any adjustments with the trigger like on the impact to fix it ?
Fx Panthera safety not working
- Thread starter Powerage
- Start date
Yes.
There is a screw behind the trigger shoe that you can adjust to engage the safety. It should be the second screw from the back. If you screw it in a little bit you should be able to adjust the safety engagement if needed.
There is a screw behind the trigger shoe that you can adjust to engage the safety. It should be the second screw from the back. If you screw it in a little bit you should be able to adjust the safety engagement if needed.
Upvote 0
I am managing my airguns 99% and never ever a single gun I sent back to the dealer, but don't touch the trigger or safety mechanism ... that is a liability issue.
I would call the place you got it from and just to let them know. You can eventually ask them if they agree you to fix it if you are confident doing it in most safest....
I would call the place you got it from and just to let them know. You can eventually ask them if they agree you to fix it if you are confident doing it in most safest....
Upvote 0
I had the same issue after I adjusted the trigger on my FX Crown. Turning the screw that @woogie_man referenced in a quarter turn fixed it. Good luck.
Upvote 0
Hi Powerage,
If your safety is still malfunctioning please give us a call or reach out via email to our customer service department.
Regards,
FX Airguns USA
Upvote 0
Very pleased to see you guys monitoring the forum and responding so quickly. Makes me feel good that I went with an FX for my first PCP.
Upvote 0
this is why every air gun I own is an FX. Cannot put a price on monitoring forums and reaching out when applicable. Plus every time I self instructed working on my guns and mucked them up, FX and UA were happy to help me out free of charge, FX went so far as to encourage my tinkering and learning.
Upvote 0