Is anyone shooting heavy slugs out of the FX leopard 70 grains and above if so what are your regulator micro and macro settings for 30 cal 700 mm sniper
FX leopard heavy slugs
- Thread starter jermaude earl
- Start date
Sorry to poach off your thread... I do not know the settings. However I would be interested in what others setting are at for Leopard 600mm shooting 44gr FX hybrids or Impulse 44gr.
Upvote 0
Well right now I've got FX hybrids 44.5 grain moving 982 fps and that's with the factory tune of regulator being set to 140 and the
micro set to 3.5
macro set to 14 and that's giving me 95 to 96 ft lb of energy with the factory tune I haven't touched the regulator yet or the macro or micro adjustments That's the way it came but enclosed in the pictures is a 78 grain Griffin ammo boat tail hollow point and as you can see at 50 yd into a steel plate this is what it did to it
Upvote 0
Thank you for the info. Quick clarification if you don't mind. You wrote that your Macro is on 14 but the picture if I am not mistaken is on 16.
Was that a typo?
Was that a typo?
Upvote 0
Who else has a .30 Leopard with a 600mm barrell? I purchased mine from Utah Airguns and had them tune it for hybrids and heavy pellets. I dont know what the factory setting were since they adjusted it before i recieved the rifle. When it arrived it was set up at 150psi on the reg and micro and macro maxed out. It shot ok at 50 yards but would send some wild fliers every 4-5 shots. They tuned it with Air Impulse 44.6 HBT slugs at approx 940FPS.
Upvote 0
I have the .30 600mm Leopard. From Utah- Tune is a tad under 150psi - Micro 3.5 - Macro Maxed. Have not had any flyers. Tuned with Air Impulse 44gr. Make sure your moderator is not clipping slugs.
Upvote 0