What is the size, model and part number of the wika gauges that fit the impact and where can i buy them
How did you know its acurate how did you test it also when i install them should i put loctite on the threads or what?"sonny"I bought the same ones as alpine84, very accurate and small like the originals.
Hi I’m interested in these gauges as the stock FX ones are very poor considering the cost of the rifle! Can you confirm that it’s just a simple switch with no extra orings etc required?"sonny"I have a very accurate gauge on my fill bottle I compared it to, no loctite, there is a washer that seals the gauges inside the hole they screw into.It just needs snuged maybe a quarter turn after it touches/bottoms out.
Could just fit it with a o ring and save all the work.."eodman"I bought the Huma gauges a lot more accurate than the FX. One thing on the Huma gauge it is a little bigger than the FX gauge and won't fit unless you modify the base plate on the Impact. I had to set the plate up in the mill and use an adjustable cutter to open it up and use Aluma black to darken up the finish. You could do it by hand but be careful it is Aluminum.
Are you talking about the bottle gauge or the regulator one"eodman"I bought the Huma gauges a lot more accurate than the FX. One thing on the Huma gauge it is a little bigger than the FX gauge and won't fit unless you modify the base plate on the Impact. I had to set the plate up in the mill and use an adjustable cutter to open it up and use Aluma black to darken up the finish. You could do it by hand but be careful it is Aluminum.
What's the diameter of the o ring"eodman"The Regulator guage. The standard guage is around 0.920 in dia and the Huma is 1.000 in dia. You could put an "o" ring as others have and this will raise the guage so it wont interfere with base plate. I don't know the dia of the Edgun guage but a lot of people use them.