Has anyone heard of this happening to there impact and what was the fix? Thanks in advance for any help. Best Steve
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back to a traditional "Forum List" view, and/or "Light" mode click HERE.
Fx impact trigger won’t set, when cocked
- Thread starter SteveS.
- Start date
It sound like your 2nd stage is set to light. There are videos on setting it by Earnest on UTube.
Upvote 0
It’s weird because it worked and then it didn’t. I never moved anything. I checked the videos from Earnest Rowe. I think it’s time to send it out again.. thanks though.
Upvote 0
Things can work loose. Maybe just try increasing the trigger weight and see if that helps. Also make sure the safety is adjusted properly if it is adjustable.
Upvote 0
Sending it to “THE DOCTOR” EARNEST ROWE....LET HIM HEAL IT. I’m confident, his team will take care of the issue..best Steve
Upvote 0
If you accidentally fired the rifle with the cocking lever not fully reset to the front, the pin on the cocking block can get bent, and then not be able to pull the hammer far enough back to engage the trigger. No doubt Ernest will fix it regardless of the cause.
Cheers,
Rusty
Cheers,
Rusty
Upvote 0
It's very simple to take these guns apart and reassemble them. Earnest Rowe and FX encourage people to work on them themselves with how to videos on youtube. The gun needs to come apart for routine checkups and cleaning anyway.
Upvote 0
Ditto.
With the Master Class video on disassembly of the Crown.....it's highly unlikely that mine will ever go back if it has a problem.
I've watched the impact ones and I'd have to say the same thing.
With the Master Class video on disassembly of the Crown.....it's highly unlikely that mine will ever go back if it has a problem.
I've watched the impact ones and I'd have to say the same thing.
Upvote 0
I’ve had that happen on non FX airguns and so far it’s been the trigger adjustment screw, 1/8 to 1/4 turn and back to working, at least your sending it in to the Pro to get fixed.
Upvote 0
How do you get in touch with Ernest, just call FX USA? What do they charge for basic services like this trigger issue?
Upvote 0
Hi Steve, I stumbled on this video from Ernest regarding that possibility. https://youtu.be/i-3h7ssPooQ
Shows his repair process and note that he’s using titanium for the replacement pinmaterial. Given how much of a klutz I can be I’m wondering if Ernest offers that as an upgrade to prevent the pin getting bent.
Upvote 0