Just picked up a used impact and every setting is the same speed from min to max on the power wheel which is about 900fps. Anyone know the problem? I would like to gradually decrease/increase pressure with every turn of the wheel like it's supposed to operate.
Fx impact 25 mk1, No Power Plenum 700mm
Huma Regulator set to 100bar
Valve adjuster is on 3rd line
Huma dual port and probe
Hammer spring has plenty slack i did not measure but it's really loose even on max setting.
Fx impact 25 mk1, No Power Plenum 700mm
Huma Regulator set to 100bar
Valve adjuster is on 3rd line
Huma dual port and probe
Hammer spring has plenty slack i did not measure but it's really loose even on max setting.