FX Impact Orings I can't find the right Thread on Them

[Bowhunter73]

Hey guys I know this has been covered and I've watched Ernest's videos but I can't find all the orings I need at the oring store I want to take my Impact apart an check everything that Ernest talks about doing to get the fps up I've adjusted the power wheel hammer spring per Ernest's video and the valve adjuster but these are the fps I'm getting in 22 and 30 30cal 834fps and the 22 is 870fps tops, so I'd like to take it down clean it an replace all the orings and anything else that needs it any help will be muchly appreciated.



Thanks Terry

 

[arigato]

Did you replace the c3 to delrin spacer ? 

 

[13brv3]

If you're asking where to find all the odd o-rings, this place had all the o-rings listed for the pre-X impact. 

http://www.oringsandmore.com/

Rusty

 

[Azycray]

I have a Word Doc created by another forum member that lists all (I think) o-rings, the location on a schematic and a link to purchase. I don't know if it will help but it can't hurt. PM me your e-mail and I'll attach it in a reply.

 

[Bowhunter73]

airgato I have not replaced the c3 delrin spacer where can I get it

 

[Bowhunter73]

Azycray thanks for the oring list 

 

[Azycray]

 

[Bowhunter73]

Fellows I appreciate all the help I have now been able to order the orings I need .

 

[arigato]

https://youtu.be/FEVDzH8XWiM?t=265

i have 940fps for .22 18gr after this mod