Where can I get a stock dual transfer port guys? I kind of ruined mine when I changed it out to the huma dual transfer port. Want to go back to stock but can't seem to find parts.
Fx impact mk2
- Thread starter ace_2o2
- Start date
I don't think they were stock for the mk2. Spaw is the only one I know of that carries the Ernest Rowe duel transfer port. Have you tried fx usa?
Upvote 0
I have collected probably five or six transfer ports in my drawers (.22 and .25), I cannot really remember which was the original in my MK2. Show a picture which was the original and what calibre you thinking about?
Edit:
This is in the Canadian classifieds.
Edit:
This is in the Canadian classifieds.
Upvote 0
I think you will need to find a used M3 transfer port, both of my factory MKII ports are a single round hole. Or you can try FX USA or a European retailer that carries individual FX parts like Huma or Bagnall Kirkwood.
Upvote 0
Just looked at my old notes from my MKll’s. They were both Power Plenum models and they came with round ports. So a stock TP for a MKll definitely is not a bridged port. I looked in my parts drawer and I still have one in .25 if you want it.
Upvote 0
It has one big one and a little one on the opposite side. Will attach picture when I get a chance.
Upvote 0
I think maybe you are referring to one of these ? It was a weird rolling update phase between the upgrade to the pellet or p marking and the s for slug marking thingy . Like a rolling update type of thing as they made changes on the fly. But My memory could be flawed haha. It has been a while since I have seen any any where. Maybe some old stock some where random.
Upvote 0
The "Dual" style Round Hole (pellet) and Bridged Rectangular Hole (slug) is the FX standard transfer port they use on all barrels now. They can be ordered directly from FX USA. The part number is the same as the "Old Style" single hole Transfer Port. Just call or email FX USA and tell them you would like to purchase a "Barrel Inlet" in the caliber you need.
Upvote 0
What caliber where you looking for? I have a single hole transfer port from a dreamline.
Dan
Dan
Upvote 0
I have these available - would they work for you?
Factory FX 0.25 Transfer Ports & 0.25 Pellet Probe
Hello AGN: I have the following FX accessories for sale: Two (2) FX Impact 0.25 factory one-hole transfer ports (which could also work w/ the FX Crown, Maverick, Dreamline & Wildcat MkIII rifles) One (1) FX Impact 0.25 factory pellet probe One (1) FX one-piece fill probe with Foster quick...
www.airgunnation.com Upvote 0
I might still be able to salvage this. Gonna try to smooth it out so there are no raised edges. Don't know how I manage to do that from taking it off. Thanks guys!
Upvote 0
I would just get it from FX, they are quick and easy. Their ordering process is kinda unique, but works fine.
I think you could clean that up, I expected it to be mauled!
I think you could clean that up, I expected it to be mauled!
Upvote 0
ace_2o2 I would not hesitate to clean it up and use it. IMHO it should be more than ok lol . Not to far back everyone seeking more power were modding them with lathes and dremel tools to get 5 to 10 + feet per second increases lol. you will be fine. 
Upvote 0
and yes that is a pre bridge port thing that has been phased out to the best of my knowledge. They have a newer design in production now as mentioned above.
I personally prefer the older ones as consistent and duplicate strings are easier to achieve with them. (((Just my personal preference)))
I personally prefer the older ones as consistent and duplicate strings are easier to achieve with them. (((Just my personal preference)))
Upvote 0
Yes, sand paper, and do it like the shoe shine boy and sing “get rhythm”
Make sure you remove the outer o rings first, though!
Upvote 0