Hi,
I identified another design issue in FX Impact Mk2. Well, it is not catastrophic but it's definitely something every Impact user should be aware of.
Please look at this picture:
It shows the nevralgic area. Green line indicates the placement of the oring. If you don't push your plug as far as you can then that oring will protrude leading to its extrusion. Just look how mine looked like:
Once you push your plug as far into the trigger block as you can then use the screw to keep it in place tightly.
That issue was resolved in Impact M3. The cut is not that deep there. Bonus points for FX for identifing the problem and correcting it in M3.
Thanks!
I identified another design issue in FX Impact Mk2. Well, it is not catastrophic but it's definitely something every Impact user should be aware of.
Please look at this picture:
It shows the nevralgic area. Green line indicates the placement of the oring. If you don't push your plug as far as you can then that oring will protrude leading to its extrusion. Just look how mine looked like:
Once you push your plug as far into the trigger block as you can then use the screw to keep it in place tightly.
That issue was resolved in Impact M3. The cut is not that deep there. Bonus points for FX for identifing the problem and correcting it in M3.
Thanks!
