I have a problem with my new FX Impact MK2 Compact .25 which I bought from UtahAirgun on Jan 2021
Group moving (Groups at 20 yards). The gun is good ... nothing wrongs with this gun ... However, the only thing is the group moving ... Pellet probe tight, use single shot by hand loading, barrel tight, scope tight (changed another scope is same issue), fps was good (no POI changes) through ProChrono, stable bench ... After every time the barrel gets cleaning , the group back to spot on ... but will start moving after about a mag ... and then moving after every a few shots after that ... Example: Took 9 shots. First 5 shots are spot on ... next 4 shots are still good but move to the left ... (See picture)
After cleaning, I checked the barrel I still see something in the barrel. Is this the problem of group moving? I couldn't get that thing out with normal cleaning (Pull through patch with Ballistol) ...
I tried to use wood stick + patch + WD40 to clean it out. After that, I run through the barrel with Ballistol & so many clean dry patch ... to make sure its very clean ... The barrel is very shiny now ... But I still see the mark (looks like scratches) inside the barrel (See picture).
This is my brand new Fx Impact ... I didn't do anything to this gun except cleaning ...I emailed UtahAirgun and they said ... its normal ... they see this often and it be able to removed with Ballistol.
However, It still have the same issue. Spot on after cleaning, anh the group starts moving and that marks collect lead really fast ... I don't know if this is a faulty liner? Or What should I do?
I don't think UtahAirgun will send me a new liner as they said its normal ... I can afford the gun, so I don't mind spend money to upgrade or buy new replacements ... I just don't feel happy ...
Kenny,
Group moving (Groups at 20 yards). The gun is good ... nothing wrongs with this gun ... However, the only thing is the group moving ... Pellet probe tight, use single shot by hand loading, barrel tight, scope tight (changed another scope is same issue), fps was good (no POI changes) through ProChrono, stable bench ... After every time the barrel gets cleaning , the group back to spot on ... but will start moving after about a mag ... and then moving after every a few shots after that ... Example: Took 9 shots. First 5 shots are spot on ... next 4 shots are still good but move to the left ... (See picture)
After cleaning, I checked the barrel I still see something in the barrel. Is this the problem of group moving? I couldn't get that thing out with normal cleaning (Pull through patch with Ballistol) ...
I tried to use wood stick + patch + WD40 to clean it out. After that, I run through the barrel with Ballistol & so many clean dry patch ... to make sure its very clean ... The barrel is very shiny now ... But I still see the mark (looks like scratches) inside the barrel (See picture).
This is my brand new Fx Impact ... I didn't do anything to this gun except cleaning ...I emailed UtahAirgun and they said ... its normal ... they see this often and it be able to removed with Ballistol.
However, It still have the same issue. Spot on after cleaning, anh the group starts moving and that marks collect lead really fast ... I don't know if this is a faulty liner? Or What should I do?
I don't think UtahAirgun will send me a new liner as they said its normal ... I can afford the gun, so I don't mind spend money to upgrade or buy new replacements ... I just don't feel happy ...
Kenny,