Tuning Fx Impact M3 Tuning Sharing

[carcorze]

Hello! New to the Impact Platform and the M3. Since the Impact M3 Quick Tuning System is designed for sharing I wanted to create this thread so we can share our current Tune settings of the M3 with our preferred Pellets and FPS. To Help us less experienced users. Thanks!

 

[ram2jeep]

There is a post on this already with some tunes available.

https://www.airgunnation.com/topic/your-m3-tunes-here/

 

[jimNCChapelhill]

M3 .30 700mm (with hammer spring spacer/weights installed from slug kit. This makes a big deal in reg pressure required)



Macro 16

Micro 4.25

1st reg 175

2nd reg 125

valve out past 4th line

slug kit installed

FX 44.5gr Hybrid slugs @965

 

[jimNCChapelhill]

Second reg set at 120 Bar: For slugs dial “16”Quick tune over 4 on line two (counting on left to right) valve wide open for pellets put valve on 4th line dial “1” and quick tune just past 2.5 or 5th line (counting left to right)

 

[jackp_MDB]

M3 .30 700mm (with Huma High Flow Dual Hole Transfer Port + Pellet Probe)



Macro 16

Micro 5

1st reg 180

2nd reg 150

valve 41/2

FX 44.5gr Hybrid slugs @1008



Also shoots FX 44.8gr pellets very well.

 

[Buck369]

What type of mods are available for the impact m3?

 

[LukeR14]

FX Impact M3 .30 Caliber 600mm with slug probe shooting 44.5 grain Hybrid Slugs.

Reg. 1: 165 bar
Reg. 2: 145 bar
Macro: 16
Micro: 4.5
Valve: 2 turns past 4th line (fully open)

Shooting 950-960 fps.

50 yard 3 shot group @ 0.141”
100 yard 3 shot group @ 0.443”

 

[Ed24]

Here's my current 177 M3 600mm tune with Zan 13gr. 1st reg on 150bar, Second reg 110bar, Macro 13, Micro 3.2 and valve 3.5ish. A group I shot today at 50yrds. This was 6 shots not five!

 

[Nsboost]

Stock .25 700 m3 with power block

Second reg: 142bar
macro: 16
micro: 4.6
Valve adjuster: "5.5" lines out

46g .250 shooting at 910fps for 84fpe

 

[2L8]

There is a post on this already with some tunes available.

https://www.airgunnation.com/topic/your-m3-tunes-here/

Bump...