FX Fx impact m3 manometer bracket leaking
- Thread starter James38
- Start date
Did you remove the manometer bracket cause I cannot see one in your pucture.
What I can see is that the grub screw where the manometer bracket fits is leaking.
Mine did the same, I degassed the gun, removed the grub screw, cleaned it and the thread in the hole and tightened it a bit more.
Leak was gone.
If you look at the schematic on the FX Airguns website you will see that those screws do not have any o-ring, etc for sealing.
Items D70 and D71.
What I can see is that the grub screw where the manometer bracket fits is leaking.
Mine did the same, I degassed the gun, removed the grub screw, cleaned it and the thread in the hole and tightened it a bit more.
Leak was gone.
If you look at the schematic on the FX Airguns website you will see that those screws do not have any o-ring, etc for sealing.
Items D70 and D71.
Last edited:
Upvote 0
I had same issue with my most recent M3. degas the gun, tighten grub screw and leak was gone.
Upvote 0
That looks like the regulator hole, not sure if the m3 and m2 are different but. If tightening the grub screw as suggested doesn't fix ut then you need to replace the o ring on the regulator housing.
Upvote 0
Hello all guys the leak is gone i made a POM ball add a grub screw then tighten the grub screw the issue was fixed thanks again
Upvote 0