Appreciate if anyone can give a lead to get one like this one here in the states. One that fits the M3
TIA
Gabe
TIA
Gabe
FX Impact M3 custom knurled cocking lever handle- looking for one
- Thread starter Broozer
- Start date
Broozer- contact WOODARD63 by pm here on the forums. He makes custom impact knurled handles that are beefier than that one from B&K. Same height, but beefier.
I believe he recently made up a batch so he should already have them ready to go.
I believe he recently made up a batch so he should already have them ready to go.
Upvote 0
Thanks!
forgot to mention but the material I’m looking for the handle to be made is from brass or bronze. Something heavy.
Gabe
forgot to mention but the material I’m looking for the handle to be made is from brass or bronze. Something heavy.
Gabe
Upvote 0
Here’s mine from WOODARD63 on my silver impact, with a B&K held next to it for comparison that I pulled from one of my wildcats.
The B&K is a good upgrade to the factory handle as I have them on my Wildcats, but for my impact I wanted something a little beefier. WOODARD63 does good work, for sure.
The B&K is a good upgrade to the factory handle as I have them on my Wildcats, but for my impact I wanted something a little beefier. WOODARD63 does good work, for sure.
Upvote 0
so you said they said the fat ones too, as in theyre a different part or option? cuz on their website i only see the one listing(part a14), so could you please drop a link if so?
Upvote 0
Anyone know of a short version ? Like one that is the same length under the lever as what's above the lever arm.
I surely don't need THREE fingers to pull the lever back !!
And no, I don't have a lathe to shorten the factory knob/handle.
Mike
I surely don't need THREE fingers to pull the lever back !!
And no, I don't have a lathe to shorten the factory knob/handle.
Mike
Upvote 0
