My magzine after about 15 shots does not put a pellet in the barrel when cocked. Remove the mag reinsert & it puts one in the barrel but none after that?? Any suggestions?
Fx impact m3 compact magazine issue
- Thread starter tba
- Start date
Spring underneath probably needs a bit more tension. It's pretty easy to do. Here is a video from orioniguanahunter. He explains how to install his impact mag cassette replacement. It will show you how to put more tension on the spring.
https://orioniguanahunter.com/collections/homepage/products/fx-impact-magazine-feeder-replacement
Quick tip, put some tape on the back of the mag to cover the locking nut and oring from falling out while taking the mag apart.
https://orioniguanahunter.com/collections/homepage/products/fx-impact-magazine-feeder-replacement
Quick tip, put some tape on the back of the mag to cover the locking nut and oring from falling out while taking the mag apart.
Upvote 0
This is more common with heavy ammo.. you need more tension to move the weight.. you should be fine after giving more tension
https://youtu.be/wApjIgBMxYY
https://youtu.be/wApjIgBMxYY
Upvote 0
Thank u my friend it worked, it took me forever to get the ball bearings lined up right but i just ran through a clip no problems. TU
Upvote 0
Thank you Jacob for that link and Erlis for the video .
I had two that were giving me issues ,
took a few attempts (actually several) to get the spring coiled just right for proper tension .
I had two that were giving me issues ,
took a few attempts (actually several) to get the spring coiled just right for proper tension .
Upvote 0