FX IMPACT BENCH SETUP 700CC

[caesar]

Added a 700cc bottle from alsafe. I get 62-63 shots on a fill @ 85ft/lbs, enough for two magazines. $180 for the bottle and $60 for an FX valve. Bottle and valve are rated for 300bar but it’s an MK-II so I’m still filling to 250. 

the weight balance is now almost perfectly distributed front to back. The big moderator is mostly to tame the barrel. Have an FX harmonic barrel tuner too but I haven’t had great results with it. It’s very accurate with the 33.5 and 43.5 NSA slugs.

the only other mod I want to get is a better pin probe holder. Possibly the NSA one. The FX one with the 1.5mm set screw doesn’t stay in place without loctite and I adjust it based on the slugs I’m shooting.

In the woods I take different guns but I definitely shoot this one the most. So much fun

 

[Airgunmann]

Nice set up. It's a 30 cal? 

 

[biohazardman]

Thanks for opening up the money pit for me again I couldn't fight the addiction any longer so once again just tossed the $$ in. Don't know where I would be without posts like this. ;^) Now for the valve.

https://airgunarcheryfun.ca/alsafe-700cc-carbon-fiber-cylinder-4500psi-max-fill/



https://fxairguns.com/support/

https://www.fxairguns-usa.com/parts-order/



Looks like too much fun to me. Enjoy

 

[Impact701]

Nice setup !

I have the NSA pin probe kit in both of my Impacts, they are definitely high quality !

They are easy to install, easier to set seating depth than the FX pin probe and easy to switch calibers

 

[Bigragu]

The K&L pellet probe block with the 4mm clamp bolt and 2mm alignment grub screw has never come loose on me. It’s design is probably the best out there.