FX Impact air bottle O-rings

[StarlingChaser]

I am sure it is on here somewhere but I could not find it. What are the 3 O-ring sizes for the Impact bottle. I have the part #`s 2529, 5105, & 5103. I have all the other O-rings for the Impact that I ordered from various places in bulk, way cheaper than the kits. Anyway as luck would have it my bottle is leaking around 5105. I found a kit for the bottle but would rather order direct. Thanks for any help.

 

[StarlingChaser]

and while I am here I will ask another question. After I removed my bottle and the gun sat for about 1 1/2 hours the regulated air suddenly degassed. I suspect this is due to another slow leak?

 

[HavocX]

 

and while I am here I will ask another question. After I removed my bottle and the gun sat for about 1 1/2 hours the regulated air suddenly degassed. I suspect this is due to another slow leak?

That is normal for the regulator air to release out. 

 

[Plinkk]

Is there a tool available to remove the 400 Bottle end cap ? Spanner type wrench with pin also best way to secure the bottle since some force probably required.

I could only find a home made one in a video. FX USA does not have tools.

 

[nirinium]

Is there a tool available to remove the 400 Bottle end cap ? Spanner type wrench with pin also best way to secure the bottle since some force probably required.

I could only find a home made one in a video. FX USA does not have tools.

Best option if you are in the USA

Stanley Proto JC491 Proto Adj Pin Spanner Wrench

 

[TDK]

I asked FX USA and they said the o-rings on bottle schematic applied to the Impact as well: https://fxairguns.com/wp-content/uploads/2019/02/Bottle-Drawing-and-Partlist.pdf