Fx impact.30 cal factory settings

I think ???? but pretty sure. 150 . then, if you watch Esting Rowe, you set your hammer spring to max (adjusting hammer spring stop to max) then with a chrony, twist your valve out until you reach maximum fps. after that you shoot for effect and adjust speed with hammer , to get away from spiral and incidentals. when you get it right you'll dot I's
​you'll know it when its right. the magic will hit!
 
"Keyman62421"I think ???? but pretty sure. 150 . then, if you watch Esting Rowe, you set your hammer spring to max (adjusting hammer spring stop to max) then with a chrony, twist your valve out until you reach maximum fps. after that you shoot for effect and adjust speed with hammer , to get away from spiral and incidentals. when you get it right you'll dot I's
​you'll know it when its right. the magic will hit!
Thanks man i will do so when i get it on Wednesday?
 
Hi guys, in 1 hour I will go out to test the new .30 STX barrel with 600 mm length on my Impact. Got the (new) Impact 4 months ago with .22 ST barrel.
I will test 3 different 0.3 caliber pellets.
JSB Diabolo (2 different weights) , H&N Barracuda and the FX Boss pellets. 50 m (approx 55 yards) is my prefered distance.
Still good conditions, warm, sunny and no wind :)
 
"schoofsbock"Just back from shooting with 600 mm STX barrel. Its absolutely ammazing to shot with this (uncleaned !) barrel. However, please dont try the H&N Barracuda with 46.3 gr. They don`t fit into the FX magazine :angry: ​ These pellets are blocking during cocking ... :angry: ​ Every pellet Manual loading will work, but ... :|
Good to know