Been looking and can’t seem to find it. Do the hybrid slugs need/benefit from the Slug Power Kit? Or are they fine to shoot out of a factory M3 as is? Do you need a different probe or is the factory probe fine?
Last edited:
Thank you. Just picked some up to try. What cal is your gun?I have an M3 that shoots the hybrid slugs at 1000fps with no mods. The only thing I did was put a NSA slug probe in the gun, when I did that I actually gained about 12fps on average. I did not change a single setting and it was just the probe.
Current settings for m3 .30 cal
2nd reg 128-129
Macro 14
Micro 4.8
Valve set on what would be line 5 if there was one.
30 cal is new. My 25 cal has been shot a fair bit. I’m gonna use the stock liner and haven’t gotten a slug liner. Don’t believe I should need one until moving up to heavier slugs.Yeah no problem. I don’t know what liner you have coming but for me I tried the slug liner and had struggles and couldn’t find anything to work. So I switched back to the stock liner “Superior” and thats where I found the hybrids to work great. Originally when I found the hybrids to work my macro was on 16. But after I put about 1,800 rounds through the gun I was able to back the macro down to 14. I think that just means the gun is prolly broke in and everything is settled where it needs to be. I don’t know if yours is brand new but keep checking speeds on your rounds as you shoot it more. Wouldn’t be surprised if you had to turn yours down a bit as well if it’s brand new