- Much like Google Reviews - members are allowed to create (1) unique thread for each vendor/manufacturer. You may "edit" your thread at any time to reflect any changes.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
FX HELP: Wildcat Jammed Video
- Thread starter rcmark
- Start date
rcmark,
I'm glad to see you were able to figure out how to unjam your rifle. I must admit I was cringing watching you pull and push on the charging handle for fear it might cause ancillary damage. Have you called AOA? If not, you really should. Your video should assist AOA and FX with a better idea of the problem than words alone. Anyway, best of luck and keep us posted.
Scott
I'm glad to see you were able to figure out how to unjam your rifle. I must admit I was cringing watching you pull and push on the charging handle for fear it might cause ancillary damage. Have you called AOA? If not, you really should. Your video should assist AOA and FX with a better idea of the problem than words alone. Anyway, best of luck and keep us posted.
Scott
Upvote 0
After about 20 minutes of this BS I was ready to break it. I had nothing to lose.
Video sent to AOA and FX (before I made this post)!!
Video sent to AOA and FX (before I made this post)!!
Upvote 0
Sorry this happened..
I am sure FX/AOA will make necessary corrections, and you'll be shootin away soon..
they both stand behind their products..
oooh, just saw previous post on trigger adjustments.. see this caveat: Do not to over tighten set screw C as it will prevent the gun from cocking and the magazine from indexing properly
I am sure FX/AOA will make necessary corrections, and you'll be shootin away soon..
they both stand behind their products..
oooh, just saw previous post on trigger adjustments.. see this caveat: Do not to over tighten set screw C as it will prevent the gun from cocking and the magazine from indexing properly
Upvote 0
I had a similar problem with an fx verminator. It would jam like that.it was one of the trigger screws that worked it self loose a little, I turned it in a little and I fixed the problem.
Good luck hope everything works out
Good luck hope everything works out
Upvote 0