Help, does anyone know the reason why my quick tune system keep coming out spring and all,it's the third time this happens, i can shoot 2 or 3 mags and then boom, the spring and plonger fly out on my table,
Thanks
Thanks
Fx dynamic 700
- Thread starter LucB
- Start date
I know little about that particular rifle, but if the parts that are jumping out are screwed in, I'd use blue Loc-Tite to hold it together.
Some machines just have places that fasteners tend to come loose from.
Luck,
J~
Some machines just have places that fasteners tend to come loose from.
Luck,
J~
Upvote 0
There is a set screw that is supposed to hold everything in place. When the adjuster comes out there is a hole visible. Just look below and you can see a coresponding hole I think it was 1.5mm wrench. Do not over tighhten! Use a little blue loctite.
Upvote 0
That set screw wasn't even touching the Quick adjustment guide on mine. The only thing that was holding that in was a lip on the Kings stock. They also made a mistake with the counter sunk hole, it's on the top instead of the bottom 
...
Make sure you didn't lose the ball bearing and spring for the adjustment wheel. Unfortunately, you have to go through everything on these guns. Mine was just slapped together.
...Make sure you didn't lose the ball bearing and spring for the adjustment wheel. Unfortunately, you have to go through everything on these guns. Mine was just slapped together.
Upvote 0
You may be ok, just making you aware it's there. The quick adjustment holds it in place under the mico wheel. And they don't list it in the parts diagram. Trust me it's there.
Upvote 0