Tuning FX Dreamline magazine

[uhfradarwill]

Anyone else having issues with their mag? Mine binds up and will not cycle the last 3 or 4 pellets. Tap the mag with something and it will cycle.

I put a full turn more pre-load on the coil spring and it worked for a bit. Now, I'm back to the same behavior.

There is zero lube in this mag, should there be?

Thanks

Will

 

[Gerry52]

If it's a spring loaded rotary magazine, try backing off the hex screw half a turn. Think it's a 2 or 2.5mm Allen wrench. 

 

[Fatmike]

Carm mags work perfectly and are affordable.

 

[uhfradarwill]

Gerry52

Thanks, but that didn't help.

Fatmike

I'll check them out.

Thanks guys

Will

 

[qball]

Carm mags work perfectly and are affordable.

Carm mags are fantastic for pellets but slugs will fall right out. Just something to keep in mind.