Hi is there a how to video off how to upgrade the hammer and spring in the dreamline. Do you have to disable the trigger to remove the hammer thanks
FX Fx dreamline hammer upgrade gen2 how to
- Thread starter Uk crowman
- Start date
There probably is on YouTube. Many videos on just about every airgun. There SHOULD be something there about yours.
Upvote 0
Nope, no messing with trigger at all.
Which Dreamline do you have?
If classic, remove from stock, unscrew hammer spring adjuster out. Replace.
WIth the lite or tac, remove the power wheel block, swap out.
very simple.
this video is an installation video for the power wheel installation. All you need to do is access the spring and hammer by removing the adjuster screw out of the rear. if you have a power wheel equipped model, reverse this.
Upvote 0
