Utah Airguns has barrel kits available. Yes! Includes probe, shroud, and barrel. .22 500mm & 600mm, .25-.30 600mm. $399.99. Now which one?
https://utahairguns.com/fx-dreamline-stx-barrel-kit/
https://utahairguns.com/fx-dreamline-stx-barrel-kit/
FX Dreamline Barrel kits at UA
- Thread starter Hoople
- Start date
The 600mm on the the DreamPup .22 adds power with less regulator pressure and is working out marvelously for mine. With pellets and slugs using the 600mm slug liner.
Upvote 0
Joe, looks aw-sum. I would like to shoot the JSB 23.95 .22 @ 900-910 fps with the 600mm barrel, or the .25, 33.95s at the same velocity for 100yd BR. Is this doable in the Dreamline?
Upvote 0
With a AMP regulator setting of 145 bar and a modified hammer spring tension with the Dreamline .22 600mm barrel, (.25/.39 & MAX) I am getting averages of:
JSB 18.13, 1013fps = 41fpe
JSB 25.39, 870fps = 42fpe
NSA 23 grain HP Slugs, 910fps = 42fpe
I mostly use the JSB 18.13 pellets on the .177/.22 transfer port setting and “5” on the HS tension. For 980fps and 38fpe. Some may say that’s shooting very hot, I’ve found that the STX barrels handle high velocities very well. Stable even out to one hundred yards.
Upvote 0
has somebody tried to fit the 600mm .22 barrel on the .25 dreamline platform ?? im interesting in the shot count at 30fpe with the jsb 18.13 gr
Upvote 0
So, it appears that there is no adapter at the muzzle for an LDC, extra I suppose? $400 + LDC adapter ± another $50?
mike
mike
Upvote 0
Shot count, JoeKool has one maybe he may know and will pipe up. Good catch on the thread adapter. I sent an email to UH, hope they respond.
Upvote 0
No adapter necessary... The Dreamline barrel shrouds have 1/2-20 UNF threads and come with a thread protector too...
Ken
Upvote 0