I shot these groups OUTDOORS using the same procedure and preparation that I used in my original FX Crown100yd indoor accuracy test(see previous post). The conditions were about the same temp(75°) with a slight variable breeze from 0 to 2mph mostly off the left(almost calm).
One curious thing, the ave. fps were higher in .22 and in .25 using the same settings that I set in previous test. I had 5 fewer shots in .22 before I reached the cutoff of 160 bar? Also, I am using the 700mm slug A liner for the .22 jsb 18g and 600mm pellet liner A for the .25 jsb Kings(surprised no one asked about that in the previous post).
Regulator pressure approx. 145 bar
Jsb 18g setup:
Valve setting- 177/22, Power wheel 4= ave. 983fps
Jsb .25 King setup:
Valve setting- 177/22, Power wheel- 5= ave. 943fps
These groups opened up quite a bit(as expected) compared to the indoor groups.
One curious thing, the ave. fps were higher in .22 and in .25 using the same settings that I set in previous test. I had 5 fewer shots in .22 before I reached the cutoff of 160 bar? Also, I am using the 700mm slug A liner for the .22 jsb 18g and 600mm pellet liner A for the .25 jsb Kings(surprised no one asked about that in the previous post).
Regulator pressure approx. 145 bar
Jsb 18g setup:
Valve setting- 177/22, Power wheel 4= ave. 983fps
Jsb .25 King setup:
Valve setting- 177/22, Power wheel- 5= ave. 943fps
These groups opened up quite a bit(as expected) compared to the indoor groups.