FX Crown Spring Guide mod

[Eamon]

Okay question,

I would like to do the hammer weight and vs mod to my .25 Crown. My question is, the spring guide mod? I have no special tool tools lath, mill... So how are you guys without the proper equipment doing the mod?

Thank you very much!

Eamon

 

[Long_Gun_Dallas]

Literally any cutting tool/device. And an abrasive to chamfer the edge of the cut when it's to the length you need 

 

[Eamon]

Literally any cutting tool/device. And an abrasive to chamfer the edge of the cut when it's to the length you need

Long gun Dallas,

Thank you very much!

Eamon

 

[Long_Gun_Dallas]

Good luck. Just remember to only cut off the length of your hammer weight from the original spring guide