Hi Everyone,
I need your help
I have a serious problem with the inner O-Ring on the regulator housing on Crown MK1. The O-Ring in question has flattened and hardened so much that it is impossible to stab and pull it out. I used a dental tool and tried for two days trying not to scratch the surface. I have heated the housing three times, but it simply is far too hard. I am thinking of soaking the housing in acetone, maybe that will degrade the O-Ring and loosen it enough to be able to pull it out. I have also thought about boiling the housing in hot water.
Please share your ideas.
Thank you, everyone.
I need your help
I have a serious problem with the inner O-Ring on the regulator housing on Crown MK1. The O-Ring in question has flattened and hardened so much that it is impossible to stab and pull it out. I used a dental tool and tried for two days trying not to scratch the surface. I have heated the housing three times, but it simply is far too hard. I am thinking of soaking the housing in acetone, maybe that will degrade the O-Ring and loosen it enough to be able to pull it out. I have also thought about boiling the housing in hot water.
Please share your ideas.
Thank you, everyone.