I need accurate measurements and dimensions to have barrel clamps made. we all are aware that there is an intergalactic backorder for the FX Crown, mine included. by sifting through the threads here I have found a reputable place to have them made, they are smwengeering.co.uk. they offer a sweet barrel clamp for the FX Wildcat and said all they need are accurate measurements in MMs. the dimensions they need are diameter of bottle, diameter of barrel assembly, gap between the two, center to center barrel/bottle. please include whether the measurements are for the previous model with the telescopic shroud or the newer model with the fixed shroud. ** edit (sorry), also what kind of tank you are using. alum., carbon fiber, fiberglass and volume, etc.
FX Crown owners / I have a mission for you - should you choose to accept....
- Thread starter strangeluck65
- Start date
I'll see if I can get these to you later. There are clamps already available BTW.... Check ebay
Upvote 0
Hi, SMW Engineering here. I don't log onto the forum much so please email me if you have the dimensions. The clamps I currently make for Wildcat owners are here:
https://smwengineering.co.uk/collections/fx-wildcat/products/fx-wildcat-barrel-clamp-and-mount
Stuart
[email protected]
https://smwengineering.co.uk/collections/fx-wildcat/products/fx-wildcat-barrel-clamp-and-mount
Stuart
[email protected]
Upvote 0
I checked out Ohioairgun.com, they're ok - but don't look as nice as the other guys. thanks for the input but what I'm looking for here is measurements.
Upvote 0
I wonder if Kraford and Lypt could machine them. I know they have a Crown as they make the ARCA plate for it. So they probably don't need measurements.
I'll try and reach out to them. I wouldn't mind getting one for my crown if they had a non-printed one. I know 3d prints can hold up okay, but just seems a little tacky on a 2k rifle
I'll try and reach out to them. I wouldn't mind getting one for my crown if they had a non-printed one. I know 3d prints can hold up okay, but just seems a little tacky on a 2k rifle
Upvote 0
I agree about the appearance. but after spending at or around $2k on the gun, 3D print may be all i can afford.
Upvote 0
Lol for sure.
I got a pretty fast reply from them. Said they are looking into making one, if they do it would be somewhere between $30 and $40 for a machined one if they put it into production.
I got a pretty fast reply from them. Said they are looking into making one, if they do it would be somewhere between $30 and $40 for a machined one if they put it into production.
Upvote 0