Tuning FX Crown mk1 regulator adjustment

[tsmith]

looking for a good video on adjusting the reg on a crown. i want to go from 130 to 140 bar. Thanks

 

[hawkeye69]

Remove the bottle and degas the gun. When you have zero on the pressure gauge turn the reg adjusting screw all the way in gently, then back it out about 1-2 turns. Reinstall the bottle. Now adjust the screw out slowly until you get the pressure you want.

 

[bd2021]

Remove the bottle and degas the gun. When you have zero on the pressure gauge turn the reg adjusting screw all the way in gently, then back it out about 1-2 turns. Reinstall the bottle. Now adjust the screw out slowly until you get the pressure you want.

Same for the MKII? Also, does the bottle need to be depressurized before removal? I'm new to this so sorry if these are stupid questions.

 

[pesty3782]

No just unscrew the bottle and you will be fine...You will hear some air coming out, but that is normal....I was "worried" first time I did it, but now not at all.

Tony P.