FX Crown Continuum relatives

[orangeokie]

I have a Crown Continuum 700mm and 380mm in .25 - I also have a 600mm .177 barrel kit with probe, as well as a .380mm liner and probe in .22 . . . I am thinking there is a family of kissing cousins of other FX rifles that could accept any/all of these Crown barrel kits (.700, .600 and .380) Do I understand that correctly? If so, which models will work with these? For example, I would be interested in adding either a standard Wildcat III or standard Dreamline Bull Pup. Could I use any or all of these barrel kits in those two models?

 

[madeintheuk]

Dreamline is the only other platform that will fit the superlite crown barrels, and not with the factory bottle either. The shroud would hit. The wildcat uses the standard stx barrel system that the maverick, and impact uses. It does use the same magazine, but all guns have their own proprietary probes other than maverick and wildcat mk3.

 

[bigmike]

I think they might work on the Dreamline. Here is mine setup with an original Dreamline Tactical barrel and shroud before they went to the pencil barrel they use now. I had to buy a smaller diameter bottle from Best Fittings and if you look I cannot put any plenums on the gun unless I use a pencil barrel. But the Crown barrels may work with this smaller bottle setup. Madeintheuk is correct they will not work with the standard bottle diameter.

 

[orangeokie]

Thanks for the replies. I would be using tubes and not bottles