FX crown continum MK2 double barrels

[Maarodigro]

Hello everyone
I have bought the FX crown continum MK2 last year, with 380mm and 700mm barrels, but on the end of barrel from the pellet probe side there is ( one hole on up side mark with P and and on down side 2 holes mark with S), what does it means
Plz guide me

 

[madeintheuk]

P for pellets
S for slugs

 

[Maarodigro]

P for pellets
S for slugs

Means i don't need separate slug liner for slugs
I will just turn the s side to push the slugs
Is it?

 

[Kgphotos]

Which one to use depends upon what type of a tune you want to use with your rifle. If you are planning to tune for slugs and will use a high reg pressure with lots of hammer tension for a lot of air flow then use the ”S” port. That means the “S” port will be facing down when installed. If on the other hand you want to have an air efficient pellet tune which requires less reg pressure and less hammer tension then use the “P” port. Hope that helps.
Kenny

 

[madeintheuk]

Means i don't need separate slug liner for slugs
I will just turn the s side to push the slugs
Is it?

Mean it gives you better flow for the faster speeds that slugs need. You would still need a slug liner for heavier slug options.

 

[Kgphotos]

If you have the superior liner then it will handle pellets and lighter to medium weight slugs well. You’ll most likely need a superior heavy liner to push really heavy slugs well. The Crown power level is better suited for light to medium slugs anyway so a regular superior liner will do you well. My Crown mk2 .22 with a superior liner does great with the NSA 24.8 grain slug.
Kenny

 

[Maarodigro]

Mean it gives you better flow for the faster speeds that slugs need. You would still need a slug liner for heavier slug options.

Plz do you have any video that i could understand how i put the barrel for slugs