FX crown continum MK2 double barrels

[Maarodigro]

Hello everyone
I have bought the FX crown continum MK2 last year, with 380mm and 700mm barrels, but on the end of barrel from the pellet probe side there is ( one hole on up side mark with P and and on down side 2 holes mark with S), what does it means
Plz guide me

 

[Chuck-in-Ohio]

Hello everyone
I have bought the FX crown continum MK2 last year, with 380mm and 700mm barrels, but on the end of barrel from the pellet probe side there is ( one hole on up side mark with P and and on down side 2 holes mark with S), what does it means
Plz guide me

The port marked S is for Slugs, or high flow for cranking up pellet speed.
The port marked P is for Pellets, or a lower power tune.

 

[Maarodigro]

The port marked S is for Slugs, or high flow for cranking up pellet speed.
The port marked P is for Pellets, or a lower power tune.

Means i don't need separate slug liner for slugs
I will just turn the s side to push the slugs
Is it?

 

[Tomiboy]

Yes, but not too heavy slugs assuming you have the standard superlight barrel that came with the rifle. To shoot heavy slugs you need the superior heavy barrel liner

 

[Maarodigro]

Yes, but not too heavy slugs assuming you have the standard superlight barrel that came with the rifle. To shoot heavy slugs you need the superior heavy barrel liner

Thanks bro
I just want to push 23 or 26 gr slugs on this barrel

 

[lutrev]

watch this, and link to tuning.

 

[lutrev]

 

[Tomiboy]

Thanks bro
I just want to push 23 or 26 gr slugs on this barrel

Your good to go...just need to turn the power UP

 

[Maarodigro]

Your good to go...just need to turn the power UP

For long range hunting wich slugs are best and what regulator and power settings should be done

 

[huntr]

No one can ‘give’ you a tune for your rifle. You’ve shot it and know where you are now. Use a little common sense and figure out which way you need to go from here.

Whats you’re velocity with pellets of similar weight to the slugs you want to shoot? Slugs will normally shoot a little slower with the same settings. Change one thing at a time and see which direction you’re going.

PS… you didn’t say which barrel you want to shoot slugs from. Big difference in settings between those to lengths.

 

[Tomiboy]

I had a lot of help tuning my Crown from KGphotos and Qball. They suggested NSA 23s and 24.8s and they were right.

 

[Maarodigro]

Your good to go...just need to turn the power UP

What is the maximum safe regulator setting for FX crown continum MK2

 

[Tomiboy]

I believe you aren't supposed to exceed 160. My 22 is set at 150 (if the gauge is correct!) for 49 FPE

 

[Maarodigro]

I believe you aren't supposed to exceed 160. My 22 is set at 150 (if the gauge is correct!) for 49 FPE

Thanks sir I will set it 160 bar maximum