My fx crown has encountered an unsolvable problem.
Transmission port .25 / .30
Reg / 135ban spring force MAX 15.5mm 835f / ps 836 832
Reg / 130ban spring force MAX 15.5mm 869f / ps 866f / ps 867f / ps
Reg / 125ban spring force MAX 15.5mm 879f / ps 876f / ps 877f / ps
Reg / 120ban spring force MAX 15.5mm 915f / ps 913 919
Based on this data, I have a problem. The higher the pressure set by the regulator, the lower the speed, which is not normal.
Transmission port .25 / .30
Reg / 135ban spring force MAX 15.5mm 835f / ps 836 832
Reg / 130ban spring force MAX 15.5mm 869f / ps 866f / ps 867f / ps
Reg / 125ban spring force MAX 15.5mm 879f / ps 876f / ps 877f / ps
Reg / 120ban spring force MAX 15.5mm 915f / ps 913 919
Based on this data, I have a problem. The higher the pressure set by the regulator, the lower the speed, which is not normal.