This was a rather difficult find for me when I was looking around for information on how a stock crown would perform with the FX Hybrid Slugs 22 grain. I received my crown day before yesterday but only fired it yesterday, fired exactly 5 magazines. First 4 were just to start the break-in period of the guns reg and so on and 5th mag was a sight in just to see what it wants to do. The weather at that time wasnt idle but decided to do it anyway. It was 80 degrees, overcast and humidity was 68% I chronied a few shots, got a max at 875 second highest was 863 hopefully it settles in at the 880/890 mark. Regulator pressure is set at 125/128 bar not quite on the 130 mark, barrel is 600mm, transfer port is .25/.30 and Max on the hammer wheel, no hammer screw adjustments whatsoever. The photo below shows a group after zeroing, I used the head of a screw no larger that .25 inches in diameter as my aim point at 30 yards, seems to me that they all entered one hole as the screw being hit extended it a little.
I'll add that the regulator pressure is from the factory all I did to the gun was change the gauges because of all the negative news I've read on them and I made a good move with that as when I removed the factory reg gauge it was still reading 20 bar so that would have caused issues for me later on.
I'll add that the regulator pressure is from the factory all I did to the gun was change the gauges because of all the negative news I've read on them and I made a good move with that as when I removed the factory reg gauge it was still reading 20 bar so that would have caused issues for me later on.
enjoy and let us know how it does out at longer range once you get a chance!
mine groups pellets like that at about 50 I want to say. Looks promising!