I decided to buy the FX chrony because tuning my Mrod and Impact M3 I felt I was just wasting lead shooting through my F1 chrony.. With the FX chrony I installed it on a CF tube and mounted it to the side rail on my M3. I have a teryx stock on my Mrod so I can use the rail on the bottom. This way I will not be changing my POI when taking it on and off and can tune for speed and accuracy at the same time or at least thats the plan.
I have a 18650 battery slot sanded down to slide into the tube. These batteries are 3.7 volt lit-ion and charge to 4.2 volts. My FX chrony draws about 14 ma before it connects and 82 ma. when connected. I ran it connected for over 4 1/2 hours continuous on just one battery but that was without shooting through and im guessing it draws more as it reads a projectile. Its winter in MN and I will not be able to shoot till spring.
I am curious if anyone knows the current draw under normal shooting conditions and how long a set of AAA batteries last you. I can always add another battery in the tube.
Have a look any input welcome
Regards
I have a 18650 battery slot sanded down to slide into the tube. These batteries are 3.7 volt lit-ion and charge to 4.2 volts. My FX chrony draws about 14 ma before it connects and 82 ma. when connected. I ran it connected for over 4 1/2 hours continuous on just one battery but that was without shooting through and im guessing it draws more as it reads a projectile. Its winter in MN and I will not be able to shoot till spring.
I am curious if anyone knows the current draw under normal shooting conditions and how long a set of AAA batteries last you. I can always add another battery in the tube.
Have a look any input welcome
Regards