I'm coming up on owning my bobcat for a year and was curious about what preventative maintenance tips you guys suggest. what lubes for O-rings (if any) any specific things to check for wear. Or anything else you guys would like to add.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
FX Bobcat Routine Maintenance
- Thread starter ezerhoden14
- Start date
- Change out breech o-ring every 2000 pellets or so (FX lists the sizes in the Royale Diagrams found under their Support Section of www.fx.com)
- Apply silicone grease on breech o-ring after barrel cleanings (go to your local dive shop to buy it cheaply)
- Use a patch and pull through using a mild cleaning lubricant such as Ballistol as needed
- Wipe down the entire using a gun cleaning rag. Again, Ballistol is great for wiping down all of the surfaces of the gun (don't forget to remove the action from the stock and wipe it down as well).
Upvote 0