FX .25 Impact Settings for Max Shot Count ?

[Shooting Targets]

Ok, need some help here with my FX Impact .25. I want to get the absolute max shot count at about 26 FPE or so. 
I see the Daystate Pulsar can shoot on low settings about 26 FPE and 190 shots before it falls of regulator which is set at 68 Bar. 

SO can the impact be set to get over 200 shots per a fill ? I saw somewhere that the FX Impact regulator should not be set lower than 100 Bar ?? As if it would damage something in the gun. 

Can anybody help me with settings ? As of now I am shooting about 51 FPE .33 grn at about 820 fps. I blow through a ton of air get about 60 shots max.

I have seen the English UK version of the FX Impact .177 is getting close to 600 shots per a fill at 12 FPE. I could go for a nice balance between the two extremes. What I realized is I like shooting my Impact so much that I prefer a high shout count vs more power. Any tips would be great. 

Thanks, 

Jay

 

[Topcat]

60 shots using 33 grains pellets is amazing! I'd say don't touch it if it's accurate.

 

[Michael]

Hi Jay

Obviously a lot is dependent on what velocity you wish to shoot. But here is a link to some of the results I got with my .25 Impact. Long story short... with the Power Wheel on Max & the Valve turned down to about 2.75, I was able to get 78 shots that averaged 900 fps. If you shoot at a lower velocity I'm sure you could get more.

Good luck & let us know what you find.

 

[Shooting Targets]

Mike thanks for your reply. Are you hog hunting with the .25 impact ?

Thanks, 

Jay

 

[GQ]

Jaydog, if you wish to hunt hog you better have the best power foot pound energy. 32 would not be enough. Put your power wheel to MAX and your valve to 4 lines visible to get 55-60 fps and the muzzel.