When I try to fill my FX Royale from my air tank the air line separates at the rifle at about 900 lbs. Why?
Foster Fittings Separate?
- Thread starter Gungeek
- Start date
you need to push the fitting until it clicks in place. If the collar doesn't slide all the way forward it's going to come off under pressure
Upvote 0
I purchased this used FX Royale .22 walnut LNIB on 6-29-16 from AOA. The trigger pull is too light to hunt with. I called AOA and they were of no help. Then I tried to put air in the tank and the connector blew off. I changed the connector, same results. The connector clicks and I cannot pull it off, but it will blow off. Now I looked at the clearance around the male on the gun and there is no play in the stock to shift the port. I have a good picture but I am 73 yrs. old and not a forum regular. Thanks for the help.
Upvote 0
Gungeek, do you have an iPhone? If so the we (or possibly someone else here) could use the "FaceTime" feature for a video chat and possibly help out.
Upvote 0
Did you swap the end of the hose and put the end that is on the tank on the gun? It is the same on both ends. Mine is.
Upvote 0